I've got a problem, help!

[red281gt]

Ok so on my rear pass. side wheel i cannot get one of the lug-nuts off. it only comes off to a certin point before it just only spins but doesnt come off. any one know any ideas to get this damn lug off with out F'n my powercoat on the wheels? 

[Powder94]

Is the stud turning at the same time?

[red281gt]

no now it wont turn at all, plus moser studs i believe are splined

[Powder94]

You might have caught a thread, spray it down good with some sort penetrating oil (WD40, PB blaster etc.)

[red281gt]

i dunno, but it's pissin me off cuz i need to change my brake pads and repaint the calipers.

[Neko-]

Any room to get some sort of hook or something behind the lugnut able to put pressure on the back of the thing when you turn it?

[red281gt]

nope :-(

[Powder94]

still not coming off?

[red281gt]

nope

[Neko-]

You don't need much, just something to grip the bolt when you slightly pull while turning it to get it off... I'd almost suggest glue in the socket of the wrench, let it harden, then pull gently while untwisting the bolt. Hopefully that would be enough to get it off... Once off however you're faced with getting the bolt out of the wrench tho... And that might still suck

[Ryans97GT]

Get some vice grips and clamp them as hard as you can onto the bolt and hold it while you turn it of. I deal with that everyday at work! Good luck!

[red281gt]

Get some vice grips and clamp them as hard as you can onto the bolt and hold it while you turn it of. I deal with that everyday at work! Good luck!

with my wheels there would be no way to do that since the lugs are set inside basically a hole.

[red281gt]

I give up im going to just take it to a mechanic im gonna buy some studs from moser just in case they have to break i.

[Neko-]

Let us know how it goes...

[red281gt]

Well I just ordered some new Moser studs today from summit. they should be shipped out today, and should be here in two days.